HPE FlexNetwork MSR Series - Pmf Association-Comeback

71
Views
WLAN service template view
Predefined user roles
network-admin
Parameters
mandatory: Specifies the mandatory mode. Only clients that support management frame protection
can access the WLAN.
optional: Specifies the optional mode. All clients can access the WLAN.
Usage guidelines
Management frame protection takes effect only for a network that uses the RSNA mechanism and is
configured with the CCMP cipher suite and RSN security information element.
Examples
# Enable management frame protection in optional mode.
<Sysname> system-view
[Sysname] wlan service-template 1
[Sysname-wlan-st-1] pmf optional
Related commands
cipher-suite
security-ie
pmf association-comeback
Use pmf association-comeback to set the association comeback time.
Use undo pmf association-comeback to restore the default.
Syntax
pmf association-comeback time
undo pmf association-comeback
Default
The association comeback time is 1 second.
Views
WLAN service template view
Predefined user roles
network-admin
Parameters
time: Specifies the association comeback time in the range of 1 to 20 seconds.
Usage guidelines
If an AP rejects the current association or reassociation request from a client, it returns an
association/reassociation response that carries the association comeback time. The AP starts to
receive the association or reassociation request from the client when the association comeback time
times out.
Examples
# Set the association comeback time to 2 seconds.