75
Syntax
security-ie { osen | rsn | wpa }
undo security-ie { osen | rsn | wpa }
Default
OSEN IE, RSN IE, and WPA IE are disabled.
Views
WLAN service template view
Predefined user roles
network-admin
Parameters
osen: Enables the OSEN IE in the beacon and probe response frames sent by the AP. The OSEN IE
advertises the OSEN capabilities of the AP.
rsn: Enables the RSN IE in the beacon and probe response frames sent by the AP. The RSN IE
advertises the RSN capabilities of the AP.
wpa: Enables the WPA IE in the beacon and probe response frames sent by the AP. The WPA IE
advertises the WPA capabilities of the AP.
Usage guidelines
You must set the security IE for RSNA networks. Set a security IE only when the WLAN service
template is disabled and the CCMP or TKIP cipher suite is configured.
You can set both the WPA IE and RSN IE for the same WLAN service template. The WPA IE and
RSN IE cannot be used together with the OSEN IE for a WLAN service template.
Set the WiFi alliance anonymous 802.1X AKM mode if the OSEN IE is used.
Examples
# Enable the RSN IE in beacon and probe responses.
<Sysname> system-view
[Sysname] wlan service-template security
[Sysname-wlan-st-security] security-ie rsn
Related commands
akm mode
cipher-suite
snmp-agent trap enable wlan usersec
Use snmp-agent trap enable wlan usersec to enable SNMP notifications for WLAN security.
Use undo snmp-agent trap enable wlan usersec to disable SNMP notifications for WLAN security.
Syntax
snmp-agent trap enable wlan usersec
undo snmp-agent trap enable wlan usersec
Default
SNMP notifications are disabled for WLAN security.
Views
System view
To Next Page
Loading...
Need help?
General
