67
Related commands
cipher-suite
security-ie
cipher-suite
Use cipher-suite to specify the cipher suite used for frame encryption.
Use undo cipher-suite to remove the cipher suite configuration.
Syntax
cipher-suite { ccmp | tkip | wep40 | wep104 | wep128 }
undo cipher-suite { ccmp | tkip | wep40 | wep104 | wep128 }
Default
No cipher suite is specified.
Views
WLAN service template view
Predefined user roles
network-admin
Parameters
ccmp: Specifies the AES-CCMP cipher suite.
tkip: Specifies the TKIP cipher suite.
wep40: Specifies the WEP40 cipher suite.
wep104: Specifies the WEP104 cipher suite.
wep128: Specifies the WEP128 cipher suite.
Usage guidelines
You must set the cipher suite for RSNA networks. Set a cipher suite only when the WLAN service
template is disabled.
Set the TKIP or CCMP cipher suite when you configure the RSN IE or WPA IE.
The WEP cipher suite includes three types, WEP40, WEP104, and WEP128. Each WLAN service
template supports only one type of WEP cipher suite. After you set a type of WEP cipher suite, you
must create and apply a key of the same type.
WEP128 cannot be set if the CCMP or TKIP cipher suite is configured.
Examples
# Set the TKIP cipher suite for frame encryption.
<Sysname> system-view
[Sysname] wlan service-template security
[Sysname-wlan-st-security] cipher-suite tkip
Related commands
security-ie
wep key
wep key-id
To Next Page
Loading...
Need help?
General
