22
Usage guidelines
This command is applicable only to 802.11n radios. Changing the radio mode to 802.11a, 802.11b, or
802.11g invalidates the command.
The smart antenna mode configuration takes effect only after you enable the smart antenna feature.
Examples
# Set the smart antenna mode to high-availability.
<Sysname> system-view
[Sysname] interface wlan-radio 0/0
[Sysname-WLAN-Radio0/0] type dot11an
[Sysname-WLAN-Radio0/0] smart-antenna policy high-availability
stbc
Use stbc enable to enable Space-Time Block Coding (STBC).
Use stbc disable to disable STBC.
Use undo stbc to restore the default.
Syntax
stbc { disable | enable }
undo stbc
Default
STBC is enabled.
Views
Radio interface view
Predefined user roles
network-admin
Usage guidelines
This command is applicable only to 802.11n radios. Changing the radio mode to 802.11a, 802.11b, or
802.11g invalidates the command.
Examples
# Enable STBC.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-wlan-radio-0/1] stbc enable
type
Use type to specify a radio mode.
Use undo type to restore the default.
Syntax
type { dot11a | dot11an | dot11b | dot11g | dot11gn }
undo type
To Next Page
Loading...
Need help?
General
