102
[Sysname-WLAN-Radio0/1] edca radio ac-vo aifsn 2
qos priority
Use qos priority to set the port priority.
Use undo qos priority to restore the default.
Syntax
qos priority priority-value
undo qos priority
Default
The port priority is 0.
Views
Service template view
Predefined user roles
network-admin
Parameters
priority-value: Specifies the port priority in the range of 0 to 7. A larger value represents a higher
priority.
Usage guidelines
When the port trust mode is enabled, the AP assigns the port priority to all packets for the service
template.
This command does not take effect when the packet trust mode is enabled.
Examples
# Set the port priority to 2 for service template 1.
<Sysname> system
[Sysname] wlan service-template 1
[Sysname-wlan-st-1] qos priority 2
Related commands
qos trust dot11e
qos trust dot11e
Use qos trust dot11e to enable the packet trust mode.
Use undo qos trust dot11e to disable the packet trust mode.
Syntax
qos trust dot11e
undo qos trust dot11e
Default
The port trust mode is enabled.
Views
Service template view
To Next Page
Loading...
Need help?
General
