15
Related commands
short-retry threshold
max-power
Use max-power to set the maximum transmit power.
Use undo max-power to restore the default.
Syntax
max-power radio-power
undo max-power
Default
The AP uses the maximum supported transmit power.
Views
Radio interface view
Predefined user roles
network-admin
Parameters
radio-power: Specifies the maximum transmit power.
Usage guidelines
The transmit power range supported by a radio varies by country code, channel, AP model, radio
mode, antenna type, and bandwidth mode. If you change these attributes for a radio after you set the
maximum transmit power, the configured maximum transmit power might be out of the supported
transmit power range. If this happens, the system automatically adjusts the maximum transmit power
to a valid value.
If you enable power lock, the locked power becomes the maximum transmit power.
Examples
# Set the maximum transmit power to 15 dBm.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-WLAN-Radio0/1] type dot11g
[Sysname-WLAN-Radio0/1] max-power 15
mimo
Use mimo to specify a MIMO mode for a radio.
Use undo mimo to restore the default.
Syntax
mimo { 1x1 | 2x2 }
undo mimo
Default
The MIMO mode is 2x2.
To Next Page
Loading...
Need help?
General
