HPE FlexNetwork MSR Series Command Reference

100
Medium time (µs) : 39 MSDU size (bytes) : 1500
Mean data rate (Kbps) : 10.000 Minimum PHY rate (Mbps) : 11.000
TS creation time : 0h:0m:5s
TS updating time : 0h:0m:5s
Uplink TS packets : 0 Downlink TS packets : 0
Uplink TS bytes : 0 Downlink TS bytes : 0
Table 12 Command output
Field Description
QoS mode
• WMM.
• -NA-.
Max SP length Maximum service period (SP) length.
AC
• AC-VO.
• AC-VI.
• AC-BE.
• AC-BK.
Assoc state
APSD attribute for an AC queue:
• T—The AC queue is trigger-enabled.
• D—The AC queue is delivery-enabled.
• T | D—The AC queue is both trigger-enabled and delivery-enabled.
• L—The AC queue is of legacy attributes.
User priority User priority for packets from wired networks.
TID Traffic identifier, in the range of 0 to 15.
Direction
Traffic direction:
• Uplink.
• Downlink.
• Bidirectional.
PSB
Power save behavior:
• 1—U-APSD power saving mode.
• 0—Traditional power saving mode.
Surplus bandwidth allowance Surplus bandwidth allowance in percentage.
Medium time Permitted medium time in microseconds.
MSDU size Average MSDU size in bytes.
Mean data rate Average data transmission rate in Kbps.
Minimum PHY rate Minimum physical transmission rate in Mbps.
Related commands
reset wlan wmm
edca radio
Use edca radio to set EDCA parameters.
Use undo edca radio to restore the default.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English