59
<Sysname> system-view
[Sysname] undo wlan broadcast-probe reply
wlan client idle-timeout
Use wlan client idle-timeout to set the client idle timeout timer.
Use undo wlan client idle-timeout to restore the default.
Syntax
wlan client idle-timeout timeout
undo wlan client idle-timeout
Default
The client idle timeout timer is 3600 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
timeout: Specifies the client idle timeout timer in the range of 60 to 86400 seconds.
Usage guidelines
If an online client does not send any frames to the associated AP before the client idle timeout timer
expires, the AP logs off the client.
Examples
# Set the client idle timeout timer to 2000 seconds.
<Sysname> system-view
[Sysname] wlan client idle-timeout 2000
wlan client keep-alive
Use wlan client keep-alive to enable client keepalive and set the client keepalive interval.
Use undo wlan client keep-alive to disable client keepalive.
Syntax
wlan client keep-alive interval
undo wlan client keep-alive
Default
Client keepalive is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the client keepalive interval in the range of 3 to 1800 seconds.
To Next Page
Loading...
Need help?
General
