33
Default
An AP does not reject 5 GHz association requests.
Views
System view
Predefined user roles
network-admin
Parameters
access-denial: Specifies the maximum number of denials for 5 GHz association requests, in the
range of 1 to 10.
Usage guidelines
If the number of times that a 5 GHz radio rejects a client reaches the specified maximum number, the
radio accepts the association request of the client.
Examples
# Set the maximum number of denials to 5 for 5 GHz association requests.
<Sysname> system-view
[Sysname] wlan band-navigation balance access-denial 5
wlan band-navigation balance session
Use wlan band-navigation balance session to configure load balancing for band navigation.
Use undo wlan band-navigation balance session to restore the default.
Syntax
wlan band-navigation balance session session [ gap gap ]
undo wlan band-navigation balance session
Default
Load balancing is disabled for band navigation.
Views
System view
Predefined user roles
network-admin
Parameters
session: Specifies the client number threshold for the 5 GHz radio, in the range of 2 to 40.
gap: Specifies the threshold for the client number gap between the 5 GHz radio and the radio that
has the fewest clients. The value range for this argument is 1 to 8 and the default value is 4.
Usage guidelines
If you enable band navigation but do not enable load balancing, the AC directs dual-band clients to
the 5 GHz radio.
The AP rejects the 5 GHz association request of a client when the following conditions are met:
• The number of clients on the 5 GHz radio reaches the specified threshold.
• The client number gap between the 5 GHz radio and the radio that has the fewest clients
reaches the specified threshold.
To Next Page
Loading...
Need help?
General
