72
<Sysname> system-view
[Sysname] wlan service-template 1
[Sysname-wlan-st-1] pmf association-comeback 2
pmf saquery retrycount
Use pmf saquery retrycount to maximum retransmission attempts for SA query requests.
Use undo pmf saquery retrycount to restore the default.
Syntax
pmf saquery retrycount count
undo pmf saquery retrycount
Default
The maximum retransmission attempt number is 4 for SA query requests.
Views
WLAN service template view
Predefined user roles
network-admin
Parameters
count: Specifies the maximum retransmission attempts for SA query requests, in the range of 1 to 16.
Usage guidelines
If an AP does not receive an acknowledgment for the SA query request after retransmission attempts
reach the maximum number, the AP determines that the client is offline.
Examples
# Set the number of maximum retransmission attempt to 3 for SA query requests.
<Sysname> system-view
[Sysname] wlan service-template 1
[Sysname-wlan-st-1] pmf saquery retrycount 3
Related commands
pmf
pmf saquery retrycount
pmf saquery retrytimeout
Use pmf saquery retrytimeout to set the interval for sending SA query requests.
Use undo pmf saquery retrytimeout to restore the default.
Syntax
pmf saquery retrytimeout timeout
undo pmf saquery retrytimeout
Default
The interval for sending SA query requests is 200 milliseconds.
To Next Page
Loading...
Need help?
General
