58
vlan
Use vlan to assign clients coming online through a service template to the specified VLAN.
Use undo vlan to restore the default.
Syntax
vlan vlan-id
undo vlan
Default
Clients join VLAN 1 after coming online through a service template.
Views
Service template view
Predefined user roles
network-admin
Parameters
vlan-id: Specifies a VLAN by its VLAN ID, in the range of 1 to 4094. If the specified VLAN does not
exist, this command creates the VLAN when clients come online.
Usage guidelines
Disable the service template before you execute this command.
If the specified VLAN does not exist, this command creates the VLAN when clients come online.
Examples
# Assign clients coming online through service template service1 to VLAN 2.
<Sysname> system-view
[Sysname] wlan service-template service1
[Sysname-wlan-st-service1] vlan 2
wlan broadcast-probe reply
Use wlan broadcast-probe reply to enable the AP to respond to broadcast probe requests.
Use undo wlan broadcast-probe reply to disable the AP from responding to broadcast probe
requests.
Syntax
wlan broadcast-probe reply
undo wlan broadcast-probe reply
Default
The AP responds to broadcast probe requests.
Views
System view
Predefined user roles
network-admin
Examples
# Disable the AP from responding to broadcast probe requests.
To Next Page
Loading...
Need help?
General
