78
Related commands
cipher-suite
wep key-id
wep key-id
Use wep key-id to apply a WEP key.
Use undo wep key-id to restore the default.
Syntax
wep key-id { 1 | 2 | 3 | 4 }
undo wep key-id
Default
Key 1 is applied.
Views
WLAN service template view
Predefined user roles
network-admin
Parameters
1: Specifies the WEP key whose ID is 1.
2: Specifies the WEP key whose ID is 2.
3: Specifies the WEP key whose ID is 3.
4: Specifies the WEP key whose ID is 4.
Usage guidelines
Apply a WEP key only when the WLAN service template is disabled.
In the RSNA mechanism, key 1 is the negotiated key. To apply a WEP key, specify a WEP key whose
ID is not 1.
You can only apply an existing WEP key.
Examples
# Configure the cipher suite WEP40, configure plain text 12345 as WEP key 1, and apply WEP key 1.
<Sysname> system-view
[Sysname] wlan service-template security
[Sysname-wlan-st-security] cipher-suite wep40
[Sysname-wlan-st-security] wep key 1 wep40 pass-phrase simple 12345
[Sysname-wlan-st-security] wep key-id 1
Related commands
wep key
wep mode dynamic
Use the wep mode dynamic command to enable the dynamic WEP mechanism.
Use the undo wep mode dynamic command to disable the dynamic WEP mechanism.
To Next Page
Loading...
Need help?
General
