EasyManuals Logo

HPE FlexNetwork MSR Series Command Reference

HPE FlexNetwork MSR Series
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
18
Syntax
protection-threshold size
undo protection-threshold
Default
The RTS threshold is 2346 bytes.
Views
Radio interface view
Predefined user roles
network-admin
Parameters
size: Specifies the RTS threshold in the range of 0 to 2346 bytes.
Usage guidelines
The system performs collision avoidance only for packets larger than the RTS threshold.
Examples
# Set the RTS threshold to 2048 bytes.
<Sysname> system-view
[Sysname] interface wlan-radio 0/0
[Sysname-WLAN-Radio0/0] protection-threshold 2048
Related commands
protection-mode
rate
Use rate to set the transmission rates for a radio.
Use undo rate to restore the default.
Syntax
rate { multicast { auto | rate-value } | { disabled | mandatory | supported } rate-value }
undo rate
Default
802.11a/802.11an:
{ Prohibited rates—None.
{ Mandatory rates—6, 12, and 24.
{ Multicast rate—Selected from the mandatory rates.
{ Supported rates—9, 18, 36, 48, and 54.
802.11b:
{ Prohibited rates—None.
{ Mandatory rates—1 and 2.
{ Multicast rate—Selected from the mandatory rates.
{ Supported rates—5.5 and 11.
802.11g/802.11gn:
{ Prohibited rates—None.

Table of Contents

Other manuals for HPE FlexNetwork MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork MSR Series and is the answer not in the manual?

HPE FlexNetwork MSR Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork MSR Series
CategoryNetwork Router
LanguageEnglish

Related product manuals