90
dot1x handshake secure enable
Use dot1x handshake secure enable to enable the 802.1X online user handshake security feature.
Use undo dot1x handshake secure enable to disable the 802.1X online user handshake security
feature.
Syntax
dot1x handshake secure enable
undo dot1x handshake secure enable
Default
The 802.1X online user handshake security feature is disabled.
Views
Service template view
Predefined user roles
network-admin
Usage guidelines
This command is configurable when the service template is disabled, and it takes effect after the
service template is enabled.
For the 802.1X online user handshake security feature to take effect, you must enable the 802.1X
online user handshake feature.
The online user handshake security feature protects only authenticated online 802.1X clients.
Examples
# Enable the 802.1X online user handshake security feature on service template service1.
<Sysname> system-view
[Sysname] wlan service-template service1
[Sysname-wlan-st-service1] dot1x handshake enable
[Sysname-wlan-st-service1] dot1x handshake secure enable
Related commands
dot1x handshake enable
dot1x max-user
Use dot1x max-user to set the maximum number of concurrent 802.1X clients on a service
template.
Use undo dot1x max-user to restore the default.
Syntax
dot1x max-user count
undo dot1x max-user
Default
A maximum of 4096 concurrent 802.1X clients are allowed on a service template.
Views
Service template view
To Next Page
Loading...
Need help?
General
