HPE FlexNetwork MSR Series Command Reference

26
Field Description
Transmit power Transmission power of the client.
BSS
Whether the client has detected wireless packets from other
BSSs.
OFDM preamble Whether the client has detected OFDM preambles.
Radar Whether the client has detected radar signals.
Unidentified signal Whether the client has detected unknown signals.
CCA busy fraction
CCA utilization is expressed as a percentage of time that the
channel is busy (during the measurement period).
RPI0 to RPI7 density
Percentage of time that each RPI was used during the
measurement period.
RPIn represents a RPI range. The value for n is in the range of 1
to 7:
• 0: RPI <= –87 dBm.
• 1: –87 dBm < RPI <= –82 dBm.
• 2: –82 dBm < RPI <= –77 dBm.
• 3: –77 dBm < RPI <= –72 dBm.
• 4: –72 dBm < RPI <= –67 dBm.
• 5: –67 dBm < RPI <= –62 dBm.
• 6: –62 dBm < RPI <= –57 dBm.
• 7: –57 dBm < RPI.
PHY type
Physical media type:
• fhss.
• dsss.
• irbaseband.
• ofdm.
• hrdsss.
• erp.
Frames
Number of frames from the same MAC address and BSSID
during the measurement.
Bin0 range Value range for Bin0.
Bin0 to Bin5
Number of successfully sent MSDUs for each average delay
range.
Binx represents an average delay range. The value for x is in the
range of 0 to 5:
• Bin0: Delay< 10 ms.
• Bin1: 10 ms <= Delay < 20 ms.
• Bin2: 20 ms <= Delay < 40 ms.
• Bin3: 40 ms <= Delay < 80 ms.
• Bin4: 80 ms <= Delay < 160 ms.
• Bin5: 160 ms <= Delay.
measure
Use measure enable to enable the specified measurement feature or all measurement features.
Use measure disable to disable the specified measurement feature or all measurement features.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English