HPE FlexNetwork MSR Series - Wlan Band-Navigation Enable; Wlan Band-Navigation Rssi-Threshold

34
Examples
# Enable load balancing for band navigation, and set the client number threshold and session gap
threshold to 10 and 5, respectively.
<Sysname> system-view
[Sysname] wlan band-navigation balance session 10 gap 5
wlan band-navigation enable
Use wlan band-navigation enable to enable band navigation.
Use undo wlan band-navigation enable to restore the default.
Syntax
wlan band-navigation enable
undo wlan band-navigation enable
Default
Band navigation is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
For band navigation to take effect, make sure fast association is disabled for the wireless service that
the clients use.
Examples
# Enable band navigation.
<Sysname> system-view
[Sysname] wlan band-navigation enable
Related commands
quick-association enable
wlan band-navigation rssi-threshold
Use wlan band-navigation rssi-threshold to set the received signal strength indicator (RSSI)
threshold for band navigation.
Use undo wlan band-navigation rssi-threshold to restore the default.
Syntax
wlan band-navigation rssi-threshold rssi-threshold
undo wlan band-navigation rssi-threshold
Default
The RSSI threshold for band navigation is 15.
Views
System view