28
Syntax
measure-duration time
undo measure-duration
Default
The measurement duration is 500 TUs.
Views
Radio interface view
Predefined user roles
network-admin
Parameters
time: Specifies the measurement duration in the range of 1 to 10000 TUs. One TU is equal to 1024
microseconds.
Usage guidelines
When measurement is enabled on the AP, the AP adds the measurement duration in the
measurement requests sent to clients.
Examples
# Set the measurement duration to 512 TUs.
<Sysname> system-view
[Sysname] interface wlan-radio 0/0
[Sysname-WLAN-Radio0/0] measure-duration 512
Related commands
measure
measure-interval
measure-interval
Use measure-interval to set the measurement interval for the AP to send measurement requests to
clients.
Use undo measure-interval to restore the default.
Syntax
measure-interval interval
undo measure-interval
Default
The measurement interval is 30 seconds.
Views
Radio interface view
Predefined user roles
network-admin
Parameters
interval: Specifies the measurement interval in the range of 10 to 60 seconds.
To Next Page
Loading...
Need help?
General
