HPE FlexNetwork MSR Series - Page 44

39
Examples
# Display brief information about all clients.
<Sysname> display wlan client
Total number of clients: 3
MAC address Username APID/RID IP address IPv6 address VLAN
000f-e265-6400 N/A 1/1 1.1.1.1 100
000f-e265-6401 user 1024/1 3.0.0.3 200
84db-ac14-dd08 N/A 1/1 5.5.5.3 1::2:0:0:3 1
Table 3 Command output
Field Description
MAC address Client MAC address.
Username
Client username:
• The field displays the client username if the client uses 802.1X or
MAC authentication.
• The field displays N/A if the client does not use 802.1X or MAC
authentication.
NOTE:
If the client uses portal authentication, this field does not display the portal
username of the client.
APID/RID ID of the AP or radio that the client is associated with.
IP address IPv4 address of the client.
IPv6 address IPv6 address of the client.
VLAN ID ID of the VLAN to which the client belongs.
# Display detailed information about all clients.
<Sysname> display wlan client verbose
Total number of clients: 1
MAC address : 000f-e265-6400
IPv4 address : 10.1.1.114
IPv6 address : 2001::1234:5678:0102:0304
Username : N/A
AID : 1
AP ID : 1
AP name : ap1
Radio ID : 1
SSID : office
BSSID : 0026-3e08-1150
VLAN ID : 3
Power save mode : Active
Wireless mode : 802.11ac
Channel bandwidth : 80MHz
SM power save : Enabled