EasyManuals Logo

HPE FlexNetwork MSR3012 User Manual

HPE FlexNetwork MSR3012
475 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #223 background imageLoading...
Page #223 background image
213
Syntax
rmon prialarm entry-number prialarm-formula prialarm-des sampling-interval { absolute | delta }
[ startup-alarm { falling | rising | rising-falling } ] rising-threshold threshold-value1 event-entry1
falling-threshold threshold-value2 event-entry2 entrytype { forever | cycle cycle-period } [ owner
text ]
undo rmon prialarm entry-number
Default
No RMON private alarm entries exist.
Views
System view
Predefined user roles
network-admin
Parameters
entry-number: Specifies a private alarm entry index in the range of 1 to 65535.
prialarm-formula: Configures a private alarm variable formula, a string of 1 to 255 characters. The
variables in the formula must be represented in OID format that starts with a dot (.), for example,
(.1.3.6.1.2.1.2.1.10.1)*8. You can configure a formula to perform the basic math operations of
addition, subtraction, multiplication, and division on these variables. To get a correct calculation
result, make sure the following conditions are met:
•
The values of the variables in the formula are positive integers.
•
The result of each calculating step is in the value range for long integers.
prialarm-des: Configures an entry description, a case-sensitive string of 1 to 127 characters.
sampling-interval: Sets the sampling interval in the range of 10 to 65535 seconds.
absolute: Specifies absolute sampling. RMON compares the value of the variable with the rising and
falling thresholds at the end of the sampling interval.
delta: Specifies delta sampling. RMON subtracts the value of the variable at the previous sample
from the current value, and then compares the difference with the rising and falling thresholds.
startup-alarm: Specifies alarms that can be generated when the alarm entry becomes valid. If you
do not specify an alarm, RMON does the following:
•
Generates a rising alarm if the first sample crosses the rising threshold.
•
Generates a falling alarm if the first sample crosses the falling threshold.
rising: Generates a rising alarm if the first sample after the entry becomes valid is greater than or
equal to the rising threshold.
falling: Generates a falling alarm if the first sample after the entry becomes valid is less than or equal
to the rising threshold.
rising-falling: Generates a rising alarm or falling alarm if the first sample after the entry becomes
valid crosses the rising threshold or falling threshold.
rising-threshold threshold-value1 event-entry1: Sets the rising threshold. The threshold-value1
argument represents the rising threshold in the range of –2147483648 to +2147483647. The
event-entry1 argument represents the index of the event that is triggered when the rising threshold is
crossed. The value range for the event-entry1 argument is 0 to 65535. If 0 is specified, the alarm
does not trigger any event.
falling-threshold threshold-value2 event-entry2: Sets the falling threshold. The threshold-value2
argument represents the falling threshold in the range of –2147483648 to +2147483647. The
event-entry2 argument represents the index of the event that is triggered when the falling threshold

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork MSR3012 and is the answer not in the manual?

HPE FlexNetwork MSR3012 Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork MSR3012
CategoryNetwork Router
LanguageEnglish

Related product manuals