238
Use undo oid to restore the default.
Syntax
oid object-identifier
undo oid
Default
The OID is 0.0. No object is specified for a set action.
Views
Action-set view
Predefined user roles
network-admin
Parameters
object-identifier: Specifies an object by its OID or name, a case-sensitive string of 1 to 255
characters. The object can be a table node, conceptual row node, table column node, leaf node, or
parent leaf node.
Examples
# Specify the object with the OID 1.3.6.1.2.1.2.2.1.7.3 for the set action of an event with the owner
owner1 and name EventA.
<Sysname> system-view
[Sysname] snmp mib event owner owner1 name EventA
[Sysname-event-owner1-EventA] action set
[Sysname-event-owner1-EventA-set] oid 1.3.6.1.2.1.2.2.1.7.3
Related commands
action
snmp mib event owner
wildcard oid (action-set view)
oid (trigger view)
Use oid to specify a MIB object for trigger sampling.
Use undo oid to restore the default.
Syntax
oid object-identifier
undo oid
Default
The OID is 0.0. No MIB object is specified for trigger sampling.
Views
Trigger view
Predefined user roles
network-admin
To Next Page
Loading...
