EasyManuals Logo

HPE FlexNetwork MSR3012 User Manual

HPE FlexNetwork MSR3012
475 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
7
--- Ping6 statistics for 2001::2 ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 4.000/25.000/62.000/20.000 ms
The output shows that:
•
The destination is reachable, and ICMPv6 echo requests are replied.
•
The minimum/average/maximum/standard deviation roundtrip time of packets is 4 milliseconds,
25 milliseconds, 62 milliseconds, and 20 milliseconds.
Table 2 Command output
Field
Description
Ping6(56 data bytes)
2001::1 --> 2001::2, press CTRL_C
to break
An ICMPv6 echo reply with a data length of 56 bytes is sent from
2001::1 to 2001::2.
Press
Ctrl+C
to abort the ping IPv6 operation.
56 bytes from 2001::2,
icmp_seq=1 hlim=64 dst=2001::1
idx=3 time=62.000 ms
Received ICMPv6 echo replies from the device whose IPv6 address
is 2001::2.
• The number of data bytes is 56.
• The packet sequence is 1.
• The hop limit value is 64.
• The destination address is 2001::1. Specify the -v keyword to
display this field.
• The index for the packet inbound interface is 3. Specify the -v
keyword to display this field.
• The response time is 62 milliseconds.
--- Ping6 statistics for 2001::2 ------ Statistics on data received and sent in an IPv6 ping operation.
5 packet(s) transmitted Number of ICMPv6 echo requests sent.
5 packet(s) received Number of ICMPv6 echo replies received.
0.0% packet loss Percentage of unacknowledged packets to the total packets sent.
round-trip min/avg/max/ std-dev
=4.000/25.000/62.000/20.000 ms
Minimum/average/maximum/s
tandard deviation response time, in
milliseconds.
tracert
Use tracert to trace the path the packets traverse from source to destination.
Syntax
tracert [ -a source-ip | -f first-ttl | -m max-ttl | -p port | -q packet-number | -t tos | { -topology
topo-name |-vpn-instance vpn-instance-name [ -resolve-as { global | none | vpn } ] } | -w timeout ]
* host
Views
Any view
Predefined user roles
network-admin
Parameters
-a source-ip: Specifies an IP address of the device as the source IP address of probe packets. If this
option is not specified, the source IP address of probe packets is the primary IP address of the
outbound interface.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork MSR3012 and is the answer not in the manual?

HPE FlexNetwork MSR3012 Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork MSR3012
CategoryNetwork Router
LanguageEnglish

Related product manuals