HPE FlexNetwork MSR3012 User Manual

420
Max buffer size 1024, current buffer size 512,
Current messages 0, dropped messages 0, overwritten messages 0
Log file: Enabled
Security log file: Enabled
Information timestamp format:
Log host: Date
Other output destination: Date
display logbuffer
Use display logbuffer to display the state of the log buffer and the log information in the log buffer.
Syntax
Centralized devices in standalone mode:
display logbuffer [ reverse ] [ level severity | size buffersize ] *
Distributed devices in standalone mode/centralized devices in IRF mode:
display logbuffer [ reverse ] [ level severity | size buffersize | slot slot-number ] *
Distributed devices in IRF mode:
display logbuffer [ reverse ] [ level severity | size buffersize | chassis chassis-number slot
slot-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
reverse: Displays log entries chronologically, with the most recent entry at the top. If you do not
specify this keyword, the command displays log entries chronologically, with the oldest entry at the
top.
level severity: Specifies a severity level in the range of 0 to 7. If you do not specify a severity level,
this command displays log information for all levels.
Table 88 Log levels
Severity
value
Level Description
Corresponding
keyword in
commands
0 Emergency
The system is unusable. For example, the system
authorization has expired.
emergency
1 Alert
Action must be taken immediately. For example, traffic
on an interface exceeds the upper limit.
alert
2 Critical
Critical condition. For example, the device temperature
exceeds the upper limit, the power module fails, or the
fan tray fails.
critical
3 Error Error condition. For example, the link state changes.
error
4 Warning
Warning
condition. For example, an interface is
disconnected, or the memory resources are used up.
warning

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English