406
Related commands
ipv6 netstream export v9-template refresh-rate packet
ipv6 netstream export version 9
Use ipv6 netstream export version 9 to export IPv6 NetStream data in the version 9 format and
choose whether to record AS and BGP next hop information.
Use undo ipv6 netstream export version to restore the default.
Syntax
ipv6 netstream export version 9 [ origin-as | peer-as ] [ bgp-nexthop ]
undo ipv6 netstream export version
Default
The version 9 format is used to export IPv6 NetStream traditional data, IPv6 NetStream aggregation
data, and MPLS flow data with IPv6 fields.
The peer AS numbers are recorded. The BGP next hop is not recorded.
Views
System view
Predefined user roles
network-admin
Parameters
origin-as: Records the source AS of the source address and the destination AS of the destination
address.
peer-as: Records the ASs before and after the AS where the NetStream device resides as the
source AS and destination AS, respectively.
bgp-nexthop: Records BGP next hops.
Usage guidelines
An IPv6 NetStream entry records the source IPv6 address, destination IPv6 address, and two AS
numbers for each address. You can choose to configure which AS numbers are to be exported as
the source AS and destination AS.
When you execute the command without any keywords, the peer AS numbers are recorded, and the
BGP next hop is not recorded.
Examples
# Configure the device to export IPv6 NetStream data in the version 9 format, and specify the IPv6
NetStream data to include the source AS and destination AS.
<Sysname> system-view
[Sysname] ipv6 netstream export version 9 origin-as
ipv6 netstream max-entry
Use ipv6 netstream max-entry to set the upper limit for IPv6 NetStream entries.
Use undo ipv6 netstream max-entry to restore the default.
Syntax
ipv6 netstream max-entry max-entries
To Next Page
Loading...
Need help?
General
