363
Flow mirroring commands
mirror-to
Use mirror-to to configure a mirroring action for a traffic behavior.
Use undo mirror-to to delete a mirroring action.
Syntax
mirror-to interface interface-type interface-number
undo mirror-to interface interface-type interface-number
Default
No mirroring action is configured for a traffic behavior.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Examples
# Create traffic behavior 1 and configure the action of mirroring traffic to GigabitEthernet 1/0/1 for the
traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior 1
[Sysname-behavior-1] mirror-to interface gigabitethernet 1/0/1
To Next Page
Loading...
