411
Table 86 Command output
sFlow datagram version
sFlow version, which can only take the value of 5. The device can send only
sFlow packets whose sFlow version is 5.
Global information Global sFlow information.
Agent IP
IP address of the sFlow agent:
• CLI—Manually configured IP address.
• Auto—Automatically configured IP address.
Source address Source IP address of sFlow packets.
Collector information sFlow collector information.
ID sFlow collector ID.
IP sFlow collector IP address.
Port sFlow collector port.
Aging
Remaining lifetime of the sFlow collector. If this field displays
N/A
, the sFlow
collector never ages out.
Size Maximum length of the sFlow data portion in an sFlow packet.
VPN-instance Name of the VPN instance to which the sFlow collector belongs.
Description Description of the sFlow collector.
Port information Information about interfaces configured with sFlow.
Interface Interface configured with sFlow.
CID
ID of the sFlow collector for receiving counter sampled packets. If no sFlow
collector ID is specified, this field displays
0
.
Interval(s) Counter sampling interval, in seconds.
FID
ID of the sFlow collector for receiving flow sampled packets. I
collector ID is specified, this field displays
0
.
MaxHLen
Maximum number of bytes that can be copied in a sampled packet (starting
from the packet header).
Rate
Number of packets out of which the interface samples a packet by using flow
sampling.
Mode
Flow sampling mode.
Determine
indicates that sFlow samples a fixed number
of packets.
Status
sFlow status of the port:
• Suspended—The sFlow feature is suspended because the port is down.
• Active—The sFlow feature is active because the port is up.
sflow agent
Use sflow agent to configure an IP address for the sFlow agent.
Use undo sflow agent to restore the default.
Syntax
sflow agent { ip ipv4-address | ipv6 ipv6-address }
undo sflow agent { ip | ipv6 }
To Next Page
Loading...
Need help?
General
