HPE FlexNetwork MSR3012

323
8 8 0.0 0.0 S 115 - 00:00:00 [kblockd/0]
9 9 0.0 0.0 S 115 - 00:00:00 [ata/0]
10 10 0.0 0.0 S 115 - 00:00:00 [ata_aux]
11 11 0.0 0.0 S 115 - 00:00:00 [kseriod]
12 12 0.0 0.0 S 120 - 00:00:00 [vzmond]
13 13 0.0 0.0 S 120 - 00:00:00 [pdflush]
14 14 0.0 0.0 S 120 - 00:00:00 [pdflush]
15 15 0.0 0.0 S 115 - 00:00:00 [kswapd0]
16 16 0.0 0.0 S 115 - 00:00:00 [aio/0]
17 17 0.0 0.0 S 115 - 00:00:00 [scsi_eh_0]
18 18 0.0 0.0 S 115 - 00:00:00 [scsi_eh_1]
19 19 0.0 0.0 S 115 - 00:00:00 [scsi_eh_2]
35 35 0.0 0.0 D 100 - 00:00:00 [lipc_topology]
---- More ----
Table 69 Command output
Field
Description
JID Job ID of a process. It never changes.
PID Number of a process.
%CPU CPU usage in percentage (%).
%MEM Memory usage in percentage (%).
STAT
State of a process:
• R—Running.
• S—Sleeping.
• T—Traced or stopped.
• D—Uninterruptible sleep.
• Z—Zombie.
PRI Priority of a process for scheduling.
TTY TTY used by a process.
HH:MM:SS Running time since the latest start.
COMMAND
Name and parameters of a process. If square brackets ([ ]) exist in a process name,
the process is a kernel thread.
display process cpu
Use display process cpu to display CPU usage for all processes.
Syntax
Centralized devices in standalone mode:
display process cpu
Distributed devices in standalone mode/centralized devices in IRF mode:
display process cpu [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display process cpu [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]