HPE FlexNetwork MSR3012 User Manual

53
probe timeout
Use probe timeout to set the probe timeout time.
Use undo probe timeout to restore the default.
Syntax
probe timeout timeout
undo probe timeout
Default
The timeout time of a probe is 3000 milliseconds.
Views
DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view
ICMP/UDP echo operation view
UDP tracert operation view
Predefined user roles
network-admin
Parameters
timeout: Specifies the probe timeout time in milliseconds. Available value ranges include:
•
10 to 86400000 for the FTP or HTTP operation.
•
10 to 3600000 for the DHCP, DNS, DLSw, ICMP echo, SNMP, TCP, UDP echo, or UDP tracert
operation.
Usage guidelines
If a probe does not complete within the period, the probe is timed out.
Examples
# Set the probe timeout time to 10000 milliseconds for the DHCP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] probe timeout 10000
raw-request
Use raw-request to enter raw request view and specify the content of an HTTP request.
Use undo raw-request to restore the default.
Syntax
raw-request
undo raw-request
Default
The contents of an HTTP raw request are not specified.
Views
HTTP operation view

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English