HPE FlexNetwork MSR3012

358
Port mirroring commands
Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
display mirroring-group
Use display mirroring-group to display mirroring group information.
Syntax
display mirroring-group { group-id | all | local }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-id: Specifies a mirroring group by its ID in the range of 1 to 6.
all: Specifies all mirroring groups.
local: Specifies local mirroring groups.
Usage guidelines
Mirroring group information includes the type, status, and content of a mirroring group. It is sorted by
mirroring group number.
Examples
# Display information about all mirroring groups.
<Sysname> display mirroring-group all
Mirroring group 1:
Type: Local
Status: Active
Mirroring port:
GigabitEthernet1/0/1 Inbound
Monitor port: GigabitEthernet1/0/2
GigabitEthernet1/0/3
GigabitEthernet1/0/4
Mirroring group 3:
Type: Local
Status: Active