HPE FlexNetwork MSR3012

To Next Page

To Previous Page

362

Examples

# Create local mirroring group 1 and configure GigabitEthernet 1/0/1 as its monitor port.

<Sysname> system-view

[Sysname] mirroring-group 1 local

[Sysname] interface gigabitethernet 1/0/1

[Sysname-GigabitEthernet1/0/1] mirroring-group 1 monitor-port

Related commands

mirroring-group

mirroring-group monitor-port (system view)

Use mirroring-group monitor-port to configure the monitor ports for a mirroring group.

Use undo mirroring-group monitor-port to remove the monitor ports from a mirroring group.

Syntax

mirroring-group group-id monitor-port interface-type interface-number

undo mirroring-group group-id monitor-port interface-type interface-number

Default

No monitor port is configured for a mirroring group.

Views

System view

Predefined user roles

network-admin

Parameters

group-id: Specifies an existing mirroring group by its ID in the range of 1 to 6.

interface-type interface-number: Specifies an interface by its type and number.

Usage guidelines

You can configure monitor ports only for local mirroring groups.

Use a monitor port only for port mirroring, so the data monitoring device receives only the mirrored

traffic.

Do not configure a port of an existing mirroring group as a monitor port.