HPE FlexNetwork MSR3012 User Manual

121
PoE commands
This feature is supported only by the MSR958 (JH301A) router and PoE-capable routers installed
with the following module:
•
DSIC-9FSW P.
•
HMIM-24GSWP.
•
SIC-4FSW P.
PoE-capable routers include the following models:
•
MSR3012/3024/3044/3064.
•
MSR4060/4080.
Commands and descriptions for centralized devices apply to the following routers:
•
MSR958 (JH301A).
•
MSR3012/3024/3044/3064.
Commands and descriptions for distributed devices apply to the MSR4060/4080 router.
apply poe-profile
Use apply poe-profile to apply a PoE profile to a power interface (PI).
Use undo apply poe-profile to restore the default.
Syntax
apply poe-profile { index index | name profile-name }
undo apply poe-profile { index index | name profile-name }
Default
No PoE profile is applied to PIs.
Views
PI view
Predefined user roles
network-admin
Parameters
index index: Specifies a PoE profile by its index number in the range of 1 to 100.
name profile-name: Specifies a PoE profile by its name, a case-sensitive string of 1 to 15 characters.
Examples
# Apply the PoE profile named forIPphone to GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] apply poe-profile name forIPphone
Related commands
apply poe-profile interface
display poe-profile

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English