HPE FlexNetwork MSR3012

424
display logfile summary
Use display logfile summary to display the log file configuration.
Syntax
display logfile summary
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the log file configuration.
<Sysname> display logfile summary
Log file: Enabled.
Log file size quota: 10 MB
Log file directory: flash:/logfile
Writing frequency: 0 hour 1 min 10 sec
Table 91 Command output
Field
Description
Log file
• Enabled—Logs can be output to a log file.
• Disabled—Logs cannot be output to a log file.
Log file size quota Maximum storage space reserved for a log file, in MB.
Log file directory Log file directory.
Writing frequency Log file writing frequency.
display security-logfile summary
Use display security-logfile summary to display the summary of the security log file.
Syntax
display security-logfile summary
Views
Any view
Predefined user roles
security-audit
Usage guidelines
A local user can use this command only after being authorized as the security log administrator by
the system administrator through the authorization-attribute user-role security-audit command.
For more information about the security log administrator, see Security Configuration Guide.
Examples
# Display the summary of the security log file.