HPE FlexNetwork MSR3012

364
NetStream configuration commands
Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954 (JH296A/JH297A/JH298A/JH299A/JH373A).
•
MSR958 (JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
display ip netstream cache
Use display ip netstream cache to display NetStream entry information.
Syntax
Centralized devices in standalone mode:
display ip netstream cache [ verbose ] [ type { ip | ipl2 | l2 | mpls [ label-position1 label-value1
[ label-position2 label-value2 [ label-position3 label-value3 ] ] ] } ] [ destination destination-ip |
interface interface-type interface-number | source source-ip ] *
Distributed devices in standalone mode/centralized devices in IRF mode:
display ip netstream cache [ verbose ] [ type { ip | ipl2 | l2 | mpls [ label-position1 label-value1
[ label-position2 label-value2 [ label-position3 label-value3 ] ] ] } ] [ destination destination-ip |
interface interface-type interface-number | source source-ip ] * [ slot slot-number ]
Distributed devices in IRF mode:
display ip netstream cache [ verbose ] [ type { ip | ipl2 | l2 | mpls [ label-position1 label-value1
[ label-position2 label-value2 [ label-position3 label-value3 ] ] ] } ] [ destination destination-ip |
interface interface-type interface-number | source source-ip ] * [ chassis chassis-number slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed information about NetStream entries.
type: Specifies the NetStream entry type. If you do not specify this keyword, this commands displays
information about all types of NetStream entries.
ip: Specifies Layer 3 NetStream entries.
ipl2: Specifies Layer 2 and Layer 3 NetStream entries.
l2: Specifies Layer 2 NetStream entries.
mpls: Specifies MPLS NetStream entries.