HPE FlexNetwork MSR3012

439
Examples
# Set the security log file saving interval to 600 seconds.
<Sysname> system-view
[Sysname] info-center security-logfile frequency 600
Related commands
info-center security-logfile enable
info-center security-logfile size-quota
Use info-center security-logfile size-quota to set the maximum size for the security log file.
Use undo info-center security-logfile size-quota to restore the default.
Syntax
info-center security-logfile size-quota size
undo info-center security-logfile size-quota
Default
The maximum size for the security log file is 10 MB.
Views
System view
Predefined user roles
network-admin
Parameters
size: Sets the maximum size for the security log file, in MB. The value range is 1 to 10.
Examples
# Set the maximum size to 6 MB for the security log file.
<Sysname> system-view
[Sysname] info-center security-logfile size-quota 6
Related commands
info-center security-logfile alarm-threshold
info-center source
Use info-center source to configure a log output rule for a module.
Use undo info-center source to restore the default.
Syntax
info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor }
{ deny | level severity }
undo info-center source { module-name | default } { console | logbuffer | logfile | loghost |
monitor }
Default
Table 93 lists the default log output rules.