253
[Sysname-event-owner1-EventA-set] oid 1.3.6.1.2.1.2.2.1.7
[Sysname-event-owner1-EventA-set] wildcard oid
Related commands
action set
oid
snmp mib event owner
wildcard oid (trigger view)
Use wildcard oid to enable wildcard search for the monitored object OIDs.
Use undo wildcard oid to restore the default.
Syntax
wildcard oid
undo wildcard oid
Default
A MIB object OID is fully specified.
Views
Trigger view
Predefined user roles
network-admin
Usage guidelines
This command must be used in conjunction with the oid command.
A wildcarded OID has two parts: the OID specified by the oid command and the wildcarded part.
For example, to specify interface description nodes of all interfaces, execute the oid ifDescr and
wildcard oid commands.
Examples
# Specify the sampled object by its OID 1.3.6.1.2.1.1.6 for a trigger and enable wildcard search for
the monitored object OIDs.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] oid 1.3.6.1.2.1.1.6
[Sysname-trigger-owner1-triggerA] wildcard oid
Related commands
oid
snmp mib event trigger
To Next Page
Loading...
Need help?
General
