HPE FlexNetwork MSR3012

393
Field
Description
TcpFlag:
DstMask: SrcMask:
DstAS: SrcAS:
NextHop:
BGPNextHop:
OutVRF: InVRF:
SamplerMode: SamplerInt:
Active: Bytes/Pkt:
Other information about the active flows in the cache:
• TCP flag.
• Destination mask.
• Source mask.
• Destination AS.
• Source AS.
• Routing next hop.
• BGP next hop.
• VPN to which the outbound packets belong.
• VPN to which the inbound packets belong.
• Sampling mode. IPv6 NetStream supports the following
sampling modes:
 0—No sampling.
 1—Fixed sampling.
 2—Random sampling.
• Sampling interval.
• Flow's active time.
• Number of bytes per packet.
display ipv6 netstream export
Use display ipv6 netstream export to display information about the IPv6 NetStream data export.
Syntax
display ipv6 netstream export
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information about the IPv6 NetStream data export.
<Sysname> display ipv6 netstream export
as aggregation export information:
Flow source interface : GigabitEthernet1/0/1
Flow destination VPN instance : VPN1
Flow destination IP address (UDP) : 40::1 (30000)
Version 9 exported flows number : 16
Version 9 exported UDP datagrams number (failed) : 2 (0)
IPv6 export information:
Flow source interface : GigabitEthernet1/0/1
Flow destination VPN instance : VPN1
Flow destination IP address (UDP) : 40::1 (30000)
Version 9 exported flows number : 16
Version 9 exported UDP datagrams number (failed): 16 (0)