HPE FlexNetwork MSR3012

166
The SNMP version of the agent:
SNMPv3
Related commands
snmp-agent sys-info
display snmp-agent trap queue
Use display snmp-agent trap queue to display basic information about the trap queue, including
the queue size and number of traps in the queue.
Syntax
display snmp-agent trap queue
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the trap queue configuration and usage status.
<Sysname> display snmp-agent trap queue
Queue size: 100
Message number: 6
Related commands
snmp-agent trap life
snmp-agent trap queue-size
display snmp-agent trap-list
Use display snmp-agent trap-list to display SNMP notifications enabling status for modules.
Syntax
display snmp-agent trap-list
Views
Any view
Usage guidelines
If a module has multiple sub-modules and SNMP notifications are enabled for one of its
sub-modules, the command output shows that the module is SNMP notifications-enabled.
To determine whether a module supports SNMP notifications, execute the snmp-agent trap
enable ? command.
The display snmp-agent trap-list command output varies by the snmp-agent trap enable
command configuration and the module configuration.
Examples
# Display SNMP notifications enabling status for modules.