HPE FlexNetwork MSR3012

139
Field
Description
Status
PoE power status:
• Normal—The PoE power supply is operating correctly.
• Absent—The PoE power supply is not present.
• Off—The PoE power is turned off.
• Active—The active PoE power supply is operating correctly.
• Standby—The standby PoE power supply is operating correctly.
• Balanced—The PoE power supply is operating in load balancing
mode.
• Redundant—The PoE power supply is operating in redundancy
mode.
• Alarm—An alarm was triggered.
• Faulty—A fault occurred.
display poe-profile
Use display poe-profile to display information about the PoE profile.
Syntax
display poe-profile [ index index | name profile-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
index index: Specifies a PoE profile by its index number in the range of 1 to 100.
name profile-name: Specifies a PoE profile by its name, a case-sensitive string of 1 to 15 characters.
Usage guidelines
If you do not specify a profile, the command displays information about all PoE profiles.
Examples
# Display information about all PoE profiles.
<Sysname> display poe-profile
PoE Profile Index ApplyNum Interfaces Configuration
forIPphone 1 6 GE1/0/5 poe enable
GE1/0/6 poe priority critical
GE1/0/7
GE1/0/8
GE1/0/9
GE1/0/10
forAP 2 2 GE1/0/11 poe enable
GE1/0/12 poe max-power 14000
--- Total PoE profiles: 3, total ports: 0 ---
# Display information about the PoE profile with index number 1.
<Sysname> display poe-profile index 1