74
Parameters
dhcp: Specifies the DHCP operation type.
dlsw: Specifies the DLSw operation type.
dns: Specifies the DNS operation type.
ftp: Specifies the FTP operation type.
http: Specifies the HTTP operation type.
icmp-echo: Specifies the ICMP echo operation type.
icmp-jitter: Specifies the ICMP jitter operation type.
path-jitter: Specifies the path jitter operation type.
snmp: Specifies the SNMP operation type.
tcp: Specifies the TCP operation type.
udp-echo: Specifies the UDP echo operation type.
udp-jitter: Specifies the UDP jitter operation type.
udp-tracert: Specifies the UDP tracert operation type.
voice: Specifies the voice operation type.
Examples
# Specify FTP as the NQA operation type and enter FTP operation view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp]
url
Use url to specify the URL of the destination.
Use undo url to restore the default.
Syntax
url url
undo url
Default
The destination URL is not specified.
Views
FTP operation view
HTTP operation view
Predefined user roles
network-admin
Parameters
url: Specifies the URL of the destination server, a case-sensitive string of 1 to 255 characters. The
following table describes the URL format and parameters for different operations.
To Next Page
Loading...
