HPE FlexNetwork MSR3012

261
CWMP commands
cwmp
Use cwmp to enter CWMP view.
Syntax
cwmp
Views
System view
Predefined user roles
network-admin
Examples
# Enter CWMP view.
<Sysname> system-view
[Sysname] cwmp
Related commands
cwmp enable
cwmp acs default password
Use cwmp acs default password to configure a password for authentication to the default ACS
URL.
Use undo cwmp acs default password to restore the default.
Syntax
cwmp acs default password { cipher | simple } string
undo cwmp acs default password
Default
No password is configured for authentication to the default ACS URL.
Views
CWMP view
Predefined user roles
network-admin
Parameters
cipher: Specifies a password in encrypted form.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string: Specifies the password. Its plaintext form is a case-sensitive string of 1 to 255 characters. Its
encrypted form is a case-sensitive string of 33 to 373 characters.