HPE FlexNetwork MSR3012 User Manual

263
Related commands
cwmp acs default password
cwmp acs default username
cwmp acs default username
Use cwmp acs default username to configure the username for authentication to the default ACS.
Use undo cwmp acs default username to restore the default.
Syntax
cwmp acs default username username
undo cwmp acs default username
Default
No username is configured for authentication to the default ACS.
Views
CWMP view
Predefined user roles
network-admin
Parameters
username: Specifies a username, a case-sensitive string of 1 to 255 characters.
Usage guidelines
You can configure only one username for authentication to the default ACS URL. If you execute this
command multiple times, the most recent configuration takes effect.
For a successful connection, make sure the CPE has the same username and password settings as
the ACS.
Examples
# Configure the username for authentication to the default ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs default username newname
Related commands
cwmp acs default password
cwmp acs default url
cwmp acs password
Use cwmp acs password to configure the password for authentication to the preferred ACS URL.
Use undo cwmp acs password to restore the default.
Syntax
cwmp acs password { cipher | simple } string
undo cwmp acs password

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English