154
Notifyview: <no specified>
Storage-type: nonvolatile
ACL name: testacl
Table 32 Command output
Group name SNMP group name.
Security model
Security model of the SNMP group:
• authPriv—Authentication with privacy.
• authNoPriv—Authentication without privacy.
• noAuthNoPriv—No authentication, no privacy.
Security model of an SNMPv1 or SNMPv2c group can only be noAuthNoPriv.
Readview Read-only MIB view accessible to the SNMP group.
Writeview Write MIB view accessible to the SNMP group.
Notifyview
Notify MIB view for the SNMP group. The SNMP users in the group can send
notifications only for the nodes in the notify MIB view.
Storage-type
Storage type, including
volatile
,
nonvolatile
,
permanent
,
readOnly
, and
other
(see
Table 31).
ACL
Number of the
ACL that controls the access of the NMSs in the SNMP group to the
device.
This field appears only when an ACL is assigned to the SNMP group. It is exclusive with
the
ACL name
field.
ACL name
Name of the ACL that controls the access of the NMSs in the SNMP group to the device.
This field appears only when an ACL is assigned to the SNMP group. It is exclusive with
the
ACL
field.
Related commands
snmp-agent group
display snmp-agent local-engineid
Use display snmp-agent local-engineid to display the local SNMP engine ID.
Syntax
display snmp-agent local-engineid
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Every SNMP agent has one SNMP engine to provide services for sending and receiving messages,
authenticating and encrypting messages, and controlling access to managed objects.
The local SNMP engine ID uniquely identifies the SNMP engine of the SNMP agent in an SNMP
domain.
To Next Page
Loading...
Need help?
General
