HPE FlexNetwork MSR3012 User Manual

182
Syntax
snmp-agent remote { ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ]
engineid engineid
undo snmp-agent remote ip-address
Default
No remote SNMP engine IDs exist.
Views
System view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IP address of a remote SNMP entity.
ipv6 ipv6-address: Specifies the IPv6 address of a remote SNMP entity.
vpn-instance vpn-instance-name: Specifies the VPN for a remote SNMP entity. The
vpn-instance-name argument specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to
31 characters. If this option is not specified, the remote SNMP entity is in the public network.
engineid: Specifies the SNMP engine ID of the remote SNMP entity. This argument is a hexadecimal
string. Its length is an even number in the range of 10 to 64. All-zero and all-F strings are invalid.
Usage guidelines
To send informs to an NMS, you must configure the SNMP engine ID of the NMS on the SNMP
agent.
The NMS accepts the SNMPv3 informs from the SNMP agent only if the engine ID in the informs is
the same as its local engine ID.
You can configure a maximum of 20 remote SNMP engine IDs.
Examples
# Set the SNMP engine ID to 123456789A for the remote entity 10.1.1.1.
<Sysname> system-view
[Sysname] snmp-agent remote 10.1.1.1 engineid 123456789A
Related commands
display snmp-agent remote
snmp-agent { inform | trap } source
Use snmp-agent { inform | trap } source to specify a source IP address for the informs or traps sent
by the SNMP agent.
Use undo snmp-agent { inform | trap } source to restore the default.
Syntax
snmp-agent { inform | trap } source interface-type { interface-number |
interface-number.subnumber }
undo snmp-agent { inform | trap } source
Default
The SNMP agent uses the IP address of the outgoing interface as the source IP address of
notifications.

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English