HPE FlexNetwork MSR3012 User Manual

130
Table 25 Command output
Field Description
Chassis 1
PoE power and PSE power information for member device 1.
(Distributed devices in IRF mode.)
Slot 1
PoE power and PSE power information for member device 1.
(Centralized devices in IRF mode.)
PoE Current Power Total power that has been consumed by PSEs.
PoE Max Power Maximum PoE power.
PoE Max Guaranteed Power Maximum power that can be supplied to critical PSEs.
PoE Remaining Allocable Power
Remaining allocable PoE power = Maximum PoE power – Total
maximum power of all PoE-enabled PSEs.
PoE Remaining Guaranteed
Power
Remaining guaranteed PoE power = Maximum guaranteed PoE power
– Total maximum power of all critical PSEs.
Typically, the maximum guaranteed PoE power is equal
to the
maximum PoE power.
Powered PoE Ports Number of PIs that are supplying power.
PSE ID ID of the PSE.
Max Maximum power of the PSE.
Current Current power of the PSE.
Peak Peak power of the PSE.
Average Average power of the PSE.
Remaining Guaranteed
Remaining guaranteed power of the PSE = Maximum guaranteed
power of the PSE – Total maximum power of all critical PIs of the PSE
Typically, the maximum guaranteed PSE power is equal
to the
maximum PSE power.
Powered Ports Number of PIs that are receiving power from the PSE.
display poe pse
Use display poe pse to display detailed PSE information.
Syntax
display poe pse [ pse-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pse-id: Specifies a PSE by its ID. If you do not specify a PSE, this command displays information
about all PSEs.
Examples
# Display detailed information about PSE 7.

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English