334
Related commands
display kernel deadloop
display kernel deadloop configuration
monitor kernel deadloop exclude-thread
monitor kernel deadloop time
monitor kernel deadloop exclude-thread
Use monitor kernel deadloop exclude-thread to disable kernel thread deadloop detection for a
kernel thread.
Use undo monitor kernel deadloop exclude-thread to enable kernel thread deadloop detection
for a kernel thread.
Syntax
Centralized devices in standalone mode:
monitor kernel deadloop exclude-thread tid
undo monitor kernel deadloop exclude-thread [ tid ]
Distributed devices in standalone mode/centralized devices in IRF mode:
monitor kernel deadloop exclude-thread tid [ slot slot-number [ cpu cpu-number ] ]
undo monitor kernel deadloop exclude-thread [ tid ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
monitor kernel deadloop exclude-thread tid [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
undo monitor kernel deadloop exclude-thread [ tid ] [ chassis chassis-number slot slot-number
[ cpu cpu-number ] ]
Default
Kernel thread deadloop detection monitors all kernel threads.
Views
System view
Predefined user roles
network-admin
Parameters
tid: Specifies a kernel thread by its ID, in the range of 1 to 2147483647. If no kernel thread is
specified for the undo command, the default is restored.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the active MPU
is specified. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
master device is specified. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. If you do not
specify this option, the global active MPU is specified. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)
To Next Page
Loading...
Need help?
General
