HPE FlexNetwork MSR3012

135
Field
Description
Peak Peak power of a PI.
Max Maximum power of a PI.
PD Description Type and location description for the PD connected with a PI.
Ports On Number of PIs that are supplying power.
Used Power consumed by all PIs.
Remaining Remaining power on the PSE.
display poe-power
Use display poe-power to display PoE power information.
Syntax
Distributed devices in standalone mode/centralized devices in IRF mode:
display poe-power
Distributed devices in IRF mode:
display poe-power [ chassis chassis-number ]
Centralized devices in IRF mode:
display poe-power [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
chassis chassis-number: Specifies an IRF member device by its member ID. If you do not specify a
member device, the command displays information about all PoE power supplies and PSEs in the
IRF fabric. (Distributed devices in IRF mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, the command displays information about all PSEs in the IRF fabric. (Centralized devices in
IRF mode.)
Examples
# Display PoE power information.
<Sysname> display poe-power
PoE Current Power : 1870 W
PoE Average Power : 2100 W
PoE Peak Power : 2350 W
PoE Max Power : 2000 W
PoE Nominal Power : 2500 W
PoE Current Electric Current : 3.00 A
PoE Current Voltage : 55.00 V
PoE Lower Input Threshold : 111.22 V
PoE Upper Input Threshold : 131.00 V