HPE FlexNetwork MSR3012 User Manual

295
Variable name
Description
_slot
(Centralized devices in standalone mode.) 0.
(Distributed devices.) ID of the slot where card hot-swapping occurs.
(Centralized devices in IRF mode.)
ID of the member device that joins or
leaves the IRF fabric.
_subslot ID of the subslot where a hot swap event occurs.
Interface:
_ifname Interface name.
SNMP:
_oid OID of the MIB variable where an SNMP operation is performed.
_oid_value Value of the MIB variable.
SNMP-Notification:
_oid OID that is included in the SNMP notification.
Process:
_process_name Process name.
Views
System view
Predefined user roles
network-admin
Parameters
var-name: Specifies a user-defined EAA environment variable by its name, a case-sensitive string of
1 to 63 characters. The name can contain digits, letters, and the underscore sign (_), but its leading
character cannot be the underscore sign.
var-value: Specifies the variable value.
Usage guidelines
When you define an action, you can enter a variable name with a leading dollar sign
($variable_name) instead of entering a value for an argument. EAA will replace the variable name
with the variable value when it performs the action.
For an action argument, you can specify a list of variable names in the form of
$variable_name1$variable_name2...$variable_nameN.
Examples
# Create an environment variable: set its name to if and set its value to interface.
<Sysname> system-view
[Sysname] rtm environment if interface
rtm scheduler suspend
Use rtm scheduler suspend to suspend monitor policies.
Use undo rtm scheduler suspend to resume monitor policies.
Syntax
rtm scheduler suspend

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English