HPE FlexNetwork MSR3012 User Manual

162
View name: ViewDefault
MIB Subtree: snmpVacmMIB
Subtree mask:
Storage-type: nonVolatile
View Type: excluded
View status: active
View name: ViewDefault
MIB Subtree: snmpModules.18
Subtree mask:
Storage-type: nonVolatile
View Type: excluded
View status: active
ViewDefault is the default MIB view. The output shows that except for the MIB objects in the
snmpUsmMIB, snmpVacmMIB, and snmpModules.18 subtrees, all the MIB objects in the iso
subtree are accessible.
Table 38 Command output
Field
Description
View name MIB view name.
MIB Subtree MIB subtree covered by the MIB view.
Subtree mask MIB subtree mask.
Storage-type Type of the medium (see Table 31) where the subtree view is stored.
View Type
Access privilege for the MIB subtree in the MIB view:
• Included—All objects in the MIB subtree are accessible in the MIB view.
• Excluded—None of the objects in the MIB subtree is accessible in the MIB view.
View status
Status of the MIB view:
• active—MIB view is effective.
• inactive—MIB view is ineffective.
MIB views are active upon their creat
ion at the CLI. To temporarily disable a MIB view
without deleting it, you can perform an SNMP set operation to set its status to inactive.
Related commands
snmp-agent mib-view
display snmp-agent remote
Use display snmp-agent remote to display remote SNMP engine IDs configured by using the
snmp-agent remote command.
Syntax
display snmp-agent remote [ { ipv4-address | ipv6 ipv6-address } [ vpn-instance
vpn-instance-name ] ]
Views
Any view

HPE FlexNetwork MSR3012 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3012
Category	Network Router
Language	English