Remove a CPU if:
● The CPU has failed.
● The CPU needs to be replaced with a new model.
Prerequisites
Conditions
● You have powered
o the RH8100 V3. For details, see 6.2 Powering O the
RH8100 V3. Then you have removed all power cables from the server.
● You have removed the compute module from the RH8100 V3. For details, see
5.2.1 Removing a Compute Module.
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for removing a CPU.
Tools
● ESD wrist strap
● Packaging materials, for example, an ESD bag
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Open the levers near the heat sink. See step (1) in Figure 5-6.
Figure 5-6 Removing a heat sink
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 118
To Next Page
Loading...
