● You have determined the position on the RH8100 V3 for installing an
indicator board interface module.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
● M3 Phillips screwdriver
Hardware
Spare indicator board interface module
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Connect all cables to the indicator board interface module. See step (1) in Figure
5-33.
Step 3 Close the upper cover for the indicator board interface module. See step (2) in
Figure 5-33.
Figure 5-33 Installing an indicator board interface module
Step 4 Insert the indicator board interface module into the slot. See step (1) in Figure
5-34.
Step 5 Close the latch to secure the indicator board interface module. See step (2) in
Figure 5-34.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 148
To Next Page
Loading...
