Tools
● ESD gloves
● M3 Phillips screwdriver
● Packaging materials, for example, an ESD bag
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Press the button on the cover of the front I/O module. See step (1) in Figure 5-47.
Step 3 Remove the cover from the front I/O module in the arrow direction. See step (2)
in Figure 5-47.
Figure 5-47 Removing a cover from a front I/O module
Step 4 Loosen the screws fastening the RAID controller card. See step (1) in Figure 5-48.
Step 5 Pull out the RAID controller card slowly. See step (2) in Figure 5-48.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 165
To Next Page
Loading...
